Evolpow reached out to have me review the M2B, and what immediately stood out was the price. This is not a category I typically shop in. The M2B sits firmly in the budget tier, which made me curious what a true all in one setup would feel like at this price point. After having it in hand for a little over a month and putting it through a variety of workouts, I have a good sense of where it succeeds and where it falls short.
The Evolpow M2B is currently priced at $929(5% off w/ code HYPE), putting it under $1,000 for a surprisingly comprehensive setup. At the front, it functions as a half rack with J hooks and spotter arms. Built into the frame is a plate loaded functional trainer with adjustable cable trolleys. There is also a Smith machine, a multi grip pull up bar, dip handles that store on the back and mount to the front, a landmine attachment, a low row foot plate, a leg press attachment for the Smith bar, and side storage for a barbell. There is also a center shelf and a pegboard with multiple hooks for accessory storage.
From a feature standpoint, the M2B covers an impressive number of bases in a very small footprint. Add an adjustable bench, a barbell, and some adjustable dumbbells, and most people could train their entire body without needing much else. The real question is not how much it includes, but how well each piece actually works.
The rack itself is built from 2×2 steel using 14 gauge material. That keeps the unit lightweight, which makes assembly and repositioning easier, but it also limits confidence at higher loads. While the manufacturer rates the rack for 700 to 800 lb on the J hooks and safeties, I personally would stay well below that. The J hooks are a single bent piece of metal with no reinforcement underneath. They will work for moderate weights, but they are not something I would trust near their stated maximum. The spotter arms are slightly better reinforced but still use thin mounting points. If you are lifting under 300 lb, this is unlikely to be an issue. Above that range, caution is warranted.
Adjustment options are adequate but not refined. Hole spacing allows you to find workable positions, though micro adjustments are limited. At 6’1”, I can squat comfortably, but usable rack height is capped by the functional trainer trolleys. Even though there are additional holes above, cable placement limits how high the J hooks can realistically go.
The pull up bar is one of the stronger parts of the unit. It includes multiple knurled grip sections along with rubberized outer grips and feels solid in use. Stability was better than expected. Even with weight loaded on the front and my full bodyweight hanging from the pull up bar, the rack did not tip forward. The extended front feet do a good job of keeping it planted.
The Smith machine performs better than I expected at this price. The top lockout requires me to slightly duck under the bar, and the bottom starting position is quite high, which limits movements like RDLs unless you use blocks. The bar itself has good knurling and the travel is fairly smooth, though there is some friction where the hooks contact the guide rods. For benching, squatting, split squats, and controlled accessory work, the Smith machine is a useful addition.
The functional trainer uses two adjustable plate loaded pulleys. Smoothness is average, around a 6 out of 10. Silicone on the uprights and proper cable tension help, but weight must be loaded evenly on both sides for it to feel good. It is not premium, but it is very usable and adds a lot of exercise variety if you otherwise would not have cables.
Several accessories add value. The included landmine is a standout and adds a lot of versatility. The low row foot plate works well for seated rows. The dip handles function as intended, though the inner grip width is the most practical option. The leg press attachment is the weakest part of the entire system. It mounts to the Smith bar and feels unstable under load. Even with Smith safeties engaged, it is not something I would recommend using heavily.
Overall, the Evolpow M2B makes sense for a very specific type of lifter. If you are newer to training, lifting moderate weights, working with limited space, and trying to stay under $1,000, this offers an impressive amount of functionality for the money. If you are an experienced lifter pushing heavy loads or looking for long term, overbuilt durability, this is not the right solution. Comparable setups built from heavier steel with selectorized stacks quickly land in the $5,000 to $7,000 range.
For the right person, the value here is hard to ignore. It packs a huge number of training options into a compact footprint at a price that few competitors can touch. Whether it makes sense comes down to your experience level, your strength levels, and what you expect from your equipment.